The blended and synthetic fiber tie can be washed with water. To prevent the tie from deforming, you can first put a layer of paper of the same shape in the tie before washing, then spray it with water, gently brush it with a brush dipped in deterge...
The blended and synthetic fiber tie can be washed with water. To prevent the tie from deforming, you can first put a layer of paper of the same shape in the tie before washing, then spray it with water, gently brush it with a brush dipped in detergent to remove dirt, then brush it thoroughly and quickly, and then rinse it with clean water. Before drying, first press the tie with a dry cloth to absorb moisture, and then hang it in a cool and ventilated place. After drying, the paper in the tie can be removed.
Tie with silk texture must not be washed with water. Pour volatile oil into a clean empty bottle, then put the tie, then tighten the bottle cap, shake the bottle every once in a while, and after about 20-30 minutes, take out the tie and hang it in a cool and ventilated place.
When dry-cleaning the tie, you can dip the cotton ball into a little alcohol or gasoline and wipe it gently to remove stains. Then apply a wet white cloth and iron it with an electric iron. The temperature during ironing is determined by the material used in the tie. The temperature of chemical fiber fabrics should not be too high (below 70℃); the temperature of wool can be higher (below 170℃).
When brushing the tie, you can use plywood paper or thin layer of plywood to make a model according to the size of the tie, put the tie on the model, and use a soft brush dipped in detergent to gently brush the tie. Then rinse it with clean water (be sure to brush it). After washing, dry it for a while, and then you can line it with a wet white cloth and iron it with an iron. The model can then be removed. In this way, the tie will not deform and will be as smooth as new.
When washing the tie with water, you can first put the tie in warm soapy water at about 30℃ and soak it for 1-3 minutes. Use a brush to gently brush along the lines of the tie. Do not use hard brushes or rub them at will. After scrubbing, rinse it with clean water at the same temperature as soapy water. Then iron it according to the above method. If the washed tie is out of shape, you can disassemble the stitches behind the tie, iron the fabric and lining cloth of the tie smoothly, and then sew it as it is.
