How to save the floor soaking in water?

How to save the floor soaking in water?

How to save the floor soaking in water?

1. If you soak in water in a small area, it is recommended not to pry the laminate floor up and dry it, as it will easily cause hard damage to the laminate floor, which may cause serious consequences of inability to resume use. It is best to quickly remove the floor's skirting line, expose the expansion joints, and distribute the water vapor through the expansion joints. Depending on the amount of water seepage, it usually takes about three to ten days to dry.

2. If the wooden floor is soaked in water, the surface water on the wooden floor must be sucked dry in the shortest time. At the same time, use a vacuum cleaner to absorb water vapor from the splicing gap of the wooden floor in the soaked water, or use a hair dryer to dry it with cold air, but do not use hot air to prevent the surface from being dry and deformed due to heat and drying.

3. If it is soaked in large areas, you should notify the floor after-sales service office in a timely manner, and carefully pry the floor up while trying to keep the floor undeformed, and place it in a “ well ” font-shaped stacked shape to prevent deformation. At the same time, be careful not to be exposed to the sun. It should be placed in a ventilated place to dry. Generally, it can be used again for solid wood floors of good quality.

4. You can also use a vacuum cleaner to suck out water vapor in the splicing gap of the soaked floor at the same time, or use a hair dryer to dry it with a cold air, but do not use hot air to prevent the surface from being dry and deformed due to heat drying.

5. After all, rescue is passive, and planning ahead is the best choice. Pay more attention to not opening the windows when they are too big to prevent rain; check whether the air conditioner, plumbing pipes and washing machines are leaking. Current floor wax mainly plays a cleaning and maintenance role and cannot be completely waterproof; there are also some floor protective films on the market, such as a transparent coating, which is non-stick and slip-proof, waterproof and scratch-proof, which is used for longer than floor wax, which saves the trouble of changing shoes at home.

6. It is best to replace the floor that has been soaked and deformed. It is not recommended to plan the arched part and then repaint it, because after flattening the arched part, repainting will cause incongruity with other boards, and the thickness of the entire wooden board is uneven, and the stress is different, making it easy to cause pits.